5
© 2021 DJI All Rights Reserved.
Product Profile
Introduction
When used with the DJI FPV Goggles V2, the DJI Motion Controller provides an immersive and intuitive flying
experience that allows users to easily control the aircraft using hand movements. Built into the DJI Motion
Controller is DJI's O3 transmission technology, offering a maximum transmission range of 6 mi (10 km). The
motion controller works at both 2.4 and 5.8 GHz and is capable of selecting the best transmission channel
automatically. The maximum runtime of the motion controller is approximately 5 hours.
The motion controller reaches its maximum transmission distance (FCC) in a wide-open area with no
electromagnetic interference when the aircraft is at an altitude of approximately 400 ft (120 m). The
maximum transmission distance refers to the maximum distance that the aircraft can still send and
receive transmissions. It does not refer to the maximum distance the aircraft can fly in a single flight.
5.8 GHz is not supported in certain regions. Observe local laws and regulations.
Diagram
1. Battery Level LEDs
Indicates the battery level of the motion controller.
2. Lock Button
Press twice to start the motors of the aircraft.
Press and hold to make the aircraft automatically take off, ascend to approximately 1 m, and hover.
Press and hold again to make the aircraft automatically land and the motors stop.
Press once to cancel Low Battery RTH when the countdown appears in the goggles.
3. Mode Button
Press once to switch between Normal and Sport mode.
1
2
3
4
5
6
7
8
9
10
