EN
EN
6. ESC Status Description
The 1280X smart ESC’s protection and alarm functions prevent damage and extend its lifespan. ESCs status is displayed by the ESC Status
Indicator and notification sounds.
Status
LED
Sound
ESC Output Cause
Resolution
Normal Operation
Slow Pulsing Green
1356
Normal
System Ready
/
Solid Green
/
Normal
Motor Started
/
Solid Yellow
/
Normal
Motors are rotating at full throttle.
/
Open-circuit Protection
Blinking Red, Yellow
and Green
/
Stop
Motor phase break or abnormal connection with the
ESC when powered on.
Fix problem then restart ESC.
Short-circuit Protection
Motor cable short-circuiting, ESC output short-
circuiting, or short-circuit inside the ESC.
Stall Protection
Blinking Red Rapidly
/
Stop
Motor Stalled
Fix problem then restart ESC.
Overheated Protection
Blinks Red Twice
/
Normal
ESC internal temperature > 100℃.
ESC internal temperature < 80℃.
Throttle Backup*
Blinking Yellow
Slowly
/
Normal
Main throttle signal lost during flight, i.e. the ESC
signal cable is disconnected. The system will
switch to backup throttle automatically.
The aircraft can fly with the
backup throttle. However, it is
recommended to land the aircraft
and re-connect the signal cable as
soon as possible.
* DJI N3 or A3 flight controller required
Abnormal Throttle Warning
Blinking Yellow
Slowly
Slow Beep
Stop
1. Both the main throttle and backup throttle signal
were lost during flight, i.e. the ESC signal cable
and data cable are disconnected.
2. Main throttle signal lost before the motor started.
1. Land the aircraft immediately and
re-connect the cables.
2. The system will not switch to
backup throttle. Re-connect the
signal cable.
Blinking Yellow
Rapidly
Single Beep Stop
Starting input signal is not at the minimum.
Throttle input is smaller than 1120
μs
.
Abnormal Voltage Warning
Blinking Red and
Yellow Alternately
Double
Beep
Stop
Starting input voltage is out of the range of the 12S
LiPo battery, i.e. input voltage > 52.2 V or input
voltage < 43.2 V.
Adjust input voltage.
Low Voltage Warning
/
Normal
Input voltage lower than 42 V when operating.
Voltage higher than 43.2 V.
Summary of Contents for E5000 PRO
Page 1: ...E5000 PRO Tuned Propulsion System V1 0 2016 12 User Manual...
Page 12: ...14 2016 CH E5000 18 1 E5000 52 2 V 2 3 4 5 6 7 DJI E5000 4 5 7 0 kg E5000 DJI DJITM...
Page 14: ...16 2016 CH 1 2 3 4mm 4 M4 14 4 M4 PWM VCC GND CW CCW 4 mm 3 E5000 30 mm CW CCW...