dji CP.EN.00000410.SB2 User Manual Download Page 62 | Manualshive

Page: 62 / 88

dji CP.EN.00000410.SB2 User Manual Download Page 62

DJI Mavic 3E/3T

User Manual

62

©

2022 DJI All Rights Reserved.

9. Photo/Video Mode: tap to switch between photo and video modes and select different

shooting options.

a. Photo mode includes single, smart low-light, timed, and pano shots.
b. Different resolution options are available when shooting videos. Tele and wide

cameras support recording at 3840×2160 and 1920×1080.

10. Shutter/Record Button: tap to take a photo or start or stop recording.
11. Playback: tap to view and download photos or videos stored on the aircraft microSD

card.

12. Adjust Zoom: tap or drag to adjust the zoom in Zoom mode.
13. AR Projection: project information such as PinPoints, waypoints, and the home point

in the camera view to improve flight situation awareness. Refer to the AR Projection
section for more details.

14. Navigation Display: displays the aircraft flight speed, altitude, orientation, home point

information, etc. Refer to the Navigation Display section for details.

15. Map View: tap to display the map view on the screen. Users can maximize or minimize

the view.

16. Camera View Switch: tap to switch between the Wide, Zoom, and IR camera views.
17. Gimbal Mode: tap to recenter gimbal or tilt gimbal down.
18. PinPoint: tap to add the current aircraft location as a PinPoint. Tap and hold to open the

PinPoint setting menu. Refer to the PinPoint section for more details.

19. Look At: after selecting a PinPoint, users can tap the Look At icon, and the camera will

face the PinPoint.

20. Status of File Upload to Cloud: displays the file upload status from DJI Pilot 2 to DJI

FlightHub 2 or the live stream connection status. Tap to view the details. If the DJI
FlightHub 2 cloud service is enabled, users can quickly configure the media file upload
settings.

«
...
60
61
62
63
64
...
»

Summary of Contents for CP.EN.00000410.SB2

























































































Reviews:

No comments