DJI Mavic 3E/3T
User Manual
61
©
2022 DJI All Rights Reserved.
Camera View
Introduction
After tapping Enter Camera View on the home screen of DJI Pilot 2 and completing the
Preflight Check, users will be directed to the camera view. The introduction below is based
on the Mavic 3T Zoom mode.
Features marked with * are only available on Mavic 3T.
1. Top Bar: displays the aircraft status, flight mode, signal quality, etc. Refer to the Top Bar
section for more details.
2. Current Mode: displays the mode of the current camera view.
3. Camera Parameters: displays the camera’s shooting/recording parameters.
4. Focus Mode: tap to switch between MF (manual focus), AFC (continuous autofocus), and
AFS (single autofocus).
5. Storage Info: displays the remaining storage information of the aircraft microSD card. It
shows the number of photos that can be shot or the remaining recording time.
6. Exposure Settings: Mavic 3T’s tele and wide cameras support Auto and M exposure
modes. Mavic 3E’s tele camera supports Auto and M modes, and the wide camera
supports Auto, S, A, and M modes. EV, AE lock, ISO, shutter, and other parameters can
be configured accordingly in different exposure modes.
7. Link Zoom*: tap to synchronize the zoom setting in the IR and Wide modes. Users can
view the linked zoom effect by enabling SBS in the IR camera view.
8. Camera Setting Menu: tap to enter the camera setting menu. The settings may vary
depending on the camera type. Switch between different camera types to view the settings.
1
2
20
21
19
3
4
7
8
5
6
16
17
18
13
14
15
9
10
11
12