dji CP.EN.00000410.SB2 User Manual Download Page 48

DJI Mavic 3E/3T 

User Manual

48

 

©

 2022 DJI All Rights Reserved. 

1. Time

 

Displays current time.

2.  DJI Pilot 2 App

 

Tap to enter DJI Pilot 2.

3. Gallery

 

Tap to view stored images and videos.

4. Files

 

Tap to view stored files.

5. Browser

 

Tap to open the browser.

6. Settings

 

Tap to enter system settings.

7. Guide

  Tap to read the guide with detailed information on the remote controller buttons and 

LEDs.

8.  Wi-Fi Signal

  Displays Wi-Fi signal strength when connected to a Wi-Fi network. Wi-Fi can be enabled 

or disabled in the shortcut or system settings.

9.  Battery Level

  Displays the battery level of the internal battery of the remote controller. The icon 

 

indicates that the battery is charging.

Screen Gestures

Slide up from the bottom 

of the screen and hold to 

access recently opened 

apps.

Slide from the left or right 

to the center of the screen 

to return to the previous 

screen.

Slide up from the bottom 

of the screen to return to 

the homepage.

Summary of Contents for CP.EN.00000410.SB2

























































































Reviews: