Infant Insert (optional);
When using insert
(A)
,
make sure insert does not
cover your infant’s face in
any way. Remove the insert
for older babies and
toddlers.To remove the
insert, unthread the harness
from harness bracket (see
belt-positioning booster
section), remove insert, and
rethread harness. Reverse
to replace insert.
Harness Covers (optional); Harness covers
(B)
help
protect neck. For Harness Covers to fit correctly, you
may have to fit the upper ends of the covers through the
harness slots. Removal is the same as for the infant
insert.
WARNING:
!
Make sure
bar is
locked
into position.
Failure to do this
could cause serious
injury or death.
8
Rotate headrest/harness
adjusting levers in. Move
headrest up or down to
adjust. Release levers.
Make sure headrest is
locked into place. Note:
The highest position is for
belt-positioning use only.
A
B
14
Securing Your Child in the Child
Restraint
1
Fit top buckle plate over
bottom buckle plate. The
connection should be flat.
Position harnesses over the
child’s shoulders.
2
Hold latch plates together
with one hand and buckle
with the other. Push latch
plates into buckle until you
hear a “click.” Pull up on
harness to make sure
buckle is locked.
3
15
continued on next page.
