11
When slide to the end of the left side, it keeps only the signal of input channel1 and shut the signal of
input channel2; when slide to the end of right side, it keeps only the input channel two and shut the
signal of input channel1.
2
3 basic applications of monitoring control
When the fader is in the middle position, it can monitor the signal of input channel1 and input
channel2.
When the fader is slid to left, it correspondingly increases the signal of input channel1 and
attenuates the signal of input channel2.wherease it correspondingly increases the signal of input
channel2 and attenuates the signal of input channel1.
When slide the fader to the left end, it monitors the signal of input channel1 and shuts the signal of
input channel2, whereas it monitors the signal of input channel2 and shuts the signal of input
channel1.
The monitoring channel is designed behind the 3 band EQ, and before the Volume control, so the
monitoring channel relatively has 3 band EQ, and will be controlled by the gain control of input
channel.
3
The Level indication sensitivity of input channel and master channel is in terms of stereo input and
output, you may observe the level indication of each channel and make the signal assignment to
the complete system timely, in order to make them work in the best status.
Summary of Contents for UM-120
Page 1: ...USER MANUAL 1 26...
Page 28: ...27...
