DJ-Tech UM-120, User Manual

Page: 10 / 29

6 CUE set up and two basis operation
：
CUE set up: use BACKWARD key or FORWARD key together with PLAY/PAUSE to finish the setup,
when one song is in playing mode, press PLAY/PAUSE key to pause, and then press BACKWARD or
FORWARD key to set up the CUE point. After finishing set up, press PLAY/PAUSE key, the song will
continue to play, and the CUE key LED will be illuminated.
During the playback of one song, you can set up several CUE points, but only the last one is valid.
Basic operation 1: if there is no CUE point in the playback of a song, no matter where is song is, press
CUE key, the song will come back to the start point and will be in pause mode, if we hold the CUE
key, it will come back to the start point as well and continue to play. When release the CUE key, it
will come back to the start point of the song and will be in Pause mode, during all this operation, the
red LED of CUE will not illuminated.
Basic operation 2: after setting the CUE point of a current song, press CUE key will make the song
come back to the cue point and in pause mode. If we hold his key, the song will also back to the
cue point and continue to play, when release the CUE key, the song will come back to the cue
point and in pause mode. During all these operation, the red LED of CUE will be illuminated.
CUE is only valid to the same song.
7 Loop function:
Set up the Loop In: press Loop-In during the playback or Pause of one song, the blue LED inside will
be illuminated, the start point of Loop is set up.
Set up the Loop Out: once set up the start point of Loop, then press Loop Out to set up the end point,
the blue LED inside the Loop Out will be illuminated, then the Loop section is finished, the song will
come back to the start point and play automatically.
If you did not cancel the Loop function, once the playback of the loop section is finished, the song
will come back to the start point and continue to play the loop section, if you want to cancel the
Loop, please press the Loop-out key or RELOOP key to cancel the loop, and the blue LED will be go
out. The Loop playback will be valid to the same song only.
3.3.3 Mixer function area
Including Line input CH1, line input CH2, Mic input, master channel and Level indication, please refer
to the fig below:
Fig 3.3.1 front panel layout
（
Mixer control area
）
9
MIC LEVEL: control the volume of MIC, when slide to the right side, the volume is increased,
when sided to the left side, the volume is decreased or closed.