ENG
LIS
H
DEUTSCH
FRAN
ÇAIS
ESP
AÑOL
DU
TC
H
IT
ALI
AN
O
PART NAME AND FUNCTIONS
1. Master Level -
Adjusts the level of the master output.
2. Mic Volume -
Adjusts microphone level.
3. Mic EQ -
These controls are used to adjust the microphone tone level HI and Low.
4. Mic OFF/ON/Talkover -
To set mic on and off, when switch at the talkover position, the
mic1 and 2 on, the sound level for everything other than that from the mic will decrease
to around 20dB.
5. Headphones Cue Button/Indicator -
Press the button for the source you wish to
monitor with headphones. When a button is OFF, its indicator lights dimly; when ON,
the button indicator lights brightly. When the ECHO effect is selected, the MASTER is
applied to headphone output only.
Relationship of headphones cue button and headphones output.
Headphone cue button
Headphones output
CH1
CH2
MASTER
L CH
R CH
ON
OFF
OFF
CH-1 (L)
CH-1 (R)
OFF
ON
OFF
CH-2 (L)
CH-2 (R)
OFF
OFF
ON
MASTER (L)
MASTER (R)
ON
ON
OFF
CH-1 (L)+ CH-2 (L)
CH-1 (R)+ CH-2 (R)
ON
OFF
ON
CH-1 (mono)
MASTER (mono)
OFF
ON
ON
CH-2 (mono)
MASTER (mono)
ON
ON
ON
CH-1 (mono)
+
CH-2 (mono)
MASTER (mono)
6. Headphone Volume -
This rotary knob adjusts the headphone volume output level.
Turning the knob in clockwise direction will increase headphone volume output.
7. XFADER FX -
The three effect select buttons are used to select the type of effect mix
desired, 3 functions of ECHO, BRAKE and TRANSFORM can be chosen.
8. Effects mode switch -
Used to select the desired crossover effect mode.
• Fader
In this mode you can select one of the effect buttons and use the
Crossfader to control the crossfader effects
• Off
Crossfader effects are disabled
• Auto
In this mode you don’t have to use the crossfader; simply push one of the
effect buttons and the mix will be done automatically in full beat sync!
Either Fader or Auto mode is active, CROSS effect is on.
9. Headphone Input -
Insert in the ¼” plug for your headphones here.
4
