background image

Dixell

 

Installing and Operating Instructions

 

release  7.0

 

 

XR160C - XR160D - XR170C - XR170D - XR162C - XR172C 

 

CONTENTS 

1. GENERAL WARNING__________________________________________________ 2 

1.1 Please read before using this manual _____________________________________ 2 
1.2 Safety Precautions____________________________________________________ 2 

2. GENERAL DESCRIPTION ______________________________________________ 2 

3. CONTROLLING LOADS________________________________________________ 2 

3.1 The compressor______________________________________________________ 2 
3.2 Fast freezing ________________________________________________________ 3 
3.3 Defrost _____________________________________________________________ 3 
3.4 “Air dryer” applications_________________________________________________ 3 
3.5 Control of evaporator fans ______________________________________________ 3 
3.6 Fan relay used as 2° compressor ________________________________________ 3 

4. FRONT PANEL COMMANDS____________________________________________ 3 

4.1 Use of LEDS ________________________________________________________ 4 

5. FUNCTION AND PARAMETERS’ PROGRAMMING MENU ____________________ 4 

5.1 Function Menu _______________________________________________________ 4 
5.2 List of functions ______________________________________________________ 4 
5.3 Exit Timeout_________________________________________________________ 5 
5.4 Accessing “Pr2” and SECURITY CODE input _______________________________ 5 
5.5 Changing a parameter’s value___________________________________________ 5 

6. LIST OF PARAMETERS________________________________________________ 5 

7. INSTALLATION AND MOUNTING ________________________________________ 7 

8. ELECTRICAL CONNECTIONS __________________________________________ 7 

8.1 Probes connection____________________________________________________ 7 

9. ALARM SIGNALS_____________________________________________________ 7 

9.1 Silencing buzzer / alarm relay output______________________________________ 7 
9.2 Alarm “EE” __________________________________________________________ 7 
9.3 Alarm reset through keyboard ___________________________________________ 8 
9.4 Alarm recovery_______________________________________________________ 8 

10. TECHNICAL DATA ___________________________________________________ 8 

11. CONNECTIONS _____________________________________________________ 9 

12. DEFAULT SETTING VALUES

 

- STANDARD MODELS _____________________ 10 

 

952057-58

 

XR160C - XR170C - XR160D - XR170D - XR162C - XR172C 

1/

י

 

 

Summary of Contents for XR160C











Reviews: