dixell XC660D, Installing And Operating Instructions

Page: 14 / 55

1592001850 XC660D GB r3.4 04.09.2017.docx XC660D 14/
55
In programming mode: it browses the parameter codes or decreases the displayed
value.
Manual restart of loads: By holding it pressed for 3s, it switches on again loads
previous locked by a safety digital input alarm.
MAINTEINANCE/CLOCK: To display the loads running hours
By holding it pressed for 3s the Maintaining menu is entered
To enter the Alarm menu
KEY COMBINATIONS
o
+
n

To lock and unlock the keyboard.
SET +
n
To enter the programming mode.
SET +
o
To exit the programming mode.
8.3 Icons
LED FUNCTION MEANING
ON Celsius degrees
ON Fahrenheit degrees
bar ON bar displaying
PSI
ON PSI displaying
kPa ON KPA displaying
ON Load 1 on
Flashing Load 1 is waiting to start (1HZ) or digital input alarm for Load 1 (2Hz).
or Load 1 in maintenance status (2Hz).
ON Load 2 on
Flashing Load 2 is waiting to start (1HZ). or digital input alarm for Load 2 (2Hz).
or Load 2 in maintenance status (2Hz).
ON Load 3 on
Flashing Load 3 is waiting to start (1HZ). or digital input alarm for Load 3 (2Hz).
o Load 3 in maintenance status (2Hz).
ON Load 4 on
Flashing Load 4 is waiting to start (1HZ). or digital input alarm for Load 4 (2Hz).
o Load 4 in maintenance status (2Hz).
5 ON Load 5 on
5 Flashing Load 5 is waiting to start (1HZ). or digital input alarm for Load 5 (2Hz).
o Load 5 in maintenance status (2Hz).
6 ON Load 6 on
6 Flashing Load 6 is waiting to start (1HZ). or digital input alarm for Load 6 (2Hz).
o Load 6 in maintenance status (2Hz).
ON The Maintenance menu has been entered
Flashing One or more loads have been placed in maintenance status
LP
ON Low pressure switch alarm
HP
ON High pressure switch alarm
ON Alarm is happening
ON All the stored alarms have been seen.
Flashing A new alarm has happened