dIXEL
dIXEL
dIXEL
dIXEL
Operating Instructions
cod.
cod.
cod.
cod. 1592017410
1592017410
1592017410
1592017410
1592017410 XLH360 GB r1.0 15.04.2005.doc
XLH360
6/16
8.
THE DISPLAY
C
F
SET
SET
%RH
To display and modify target temperature set point. (
SET TEMP
) for the running (St1)and
the dripping (StG) phase.
To display and modify target humidity set point (
SET %RH
) of the running (SH1) phase; in
programming mode it selects a parameter or confirm an operation.
In programming mode it browses the parameter codes or increases the displayed value.
If oA2=ESt hold it pressed for 3s to start a extraction cycle
To start a manual defrost: hold it pressed for at least 3s.
In programming mode it browses the parameter codes or decreases the displayed value.
Switch ON and OFF the light, if present (oA1=lig)
Start
: to start the cycle
Clock
: to set the duration of the dripping (dri), running (on) and stopping (off) phases
Switch ON and OFF the instrument.
KEY COMBINATIONS
+
To lock and unlock the keyboard
+
To enter the programming mode.
+
To exit the programming mode.
8.1
ICONS AND SYMBOLS
Each LED function is described in the following table.
LED
MODE
FUNCTION
ON
- Instrument in stand by.
- In “Pr2” indicates that the parameter is also present in “Pr1”.
°C
ON
°C
