DivioTec NRP14162 Series, Manual

Page: 64 / 68

Chapter 4: BIOS Setup
59
Version 2.21.1278. Copyright (C) 2021 AMI
Save & Exit Boot Security Chipset Advanced Main
Aptio Setup - AMI
Version 2.21.1278. Copyright (C) 2021 AMI
Save & Exit Boot Security Chipset Advanced Main
Aptio Setup - AMI
Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
The password length must be
in the following range:
Minimum length
3
Maximum length 20
Administrator Password
►
Secure Boot
Set Administrator Password
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
System Mode Setup
Secure Boot [Enabled]
Not Active
Secure Boot Mode [Standard]
►
Restore Factory Keys
►
Reset to Setup Mode
►
Key Management
Secure Boot feature is Active
if Secure Boot is Enabled.
Platform Key(PK) is enrolled
and the System is in User mode.
The mode change requires
platform reset
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Security Secure Boot
Administrator Password
Select this to reconfigure the administrator’s password.
Secure Boot
Select this to enable or disable Secure Boot. Secure Boot only works when
the system runs in user mode.
Secure Boot Mode
Select this to configure the Secure Boot mode.
Standard Fixed scure boot policy.
Custom Secure boot policy variables can be configured by a physically
present user without full authentication.