DivioTec NRP14162 Series, Manual

Page: 54 / 68

Chapter 4: BIOS Setup
49
Version 2.21.1278. Copyright (C) 2021 AMI
Advanced
Aptio Setup - AMI
Version 2.21.1278. Copyright (C) 2021 AMI
Advanced
Aptio Setup - AMI
Serial Port 1 Configuration
This section is used to configure serial port 1.
Serial Port 1 Configuration Enable or Disable Serial Port
(COM)
Serial Port
Device Settings
Onboard Serial Port Mode
[Enabled]
IO=3F8h; IRQ=4;
[RS-232]
Change Settings [Auto]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Serial Port
Enables or disables serial port.
Onboard Serial Port Mode
This field is used to configure the mode of serial port as RS232 or RS485.
Change Settings
Select an optimal settings for Super IO Device.
Hardware Monitor
This section is used to monitor hardware such as temperature, fan speed
and voltages.
PC Health Status Smart Fan function setting
System temperature1 : +48 ° c
System Fan Speed : 8035 RPM
5V : +5.117 V
12V : +12.096 V
 Smart Fan Function
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
System temperature
Detects and displays current system temperature.
System Fan Speed
Detects and displays current system fan speed.
5V to 12V
Detects and displays the output voltages.
Smart Fan Function
Configures the smart fan function settings.