DivioTec NRP14162 Series, Manual

Page: 56 / 68

Chapter 4: BIOS Setup
51
Version 2.21.1278. Copyright (C) 2021 AMI
Advanced
Aptio Setup - AMI
Temperature 1 to Temperature 4
Configures the temperature setting.
FD/RPM 1 to FD/RPM 4
The value of Fan Duty/RPM when temperature is T1 to T4.
Critical temperature
Configures the time that Fan Out requires for reducing its value by one step.
Critical tolerance
Configures the tolerance of critical temperature.
Enable critical duty
Enables critital duty, if enabled, it will use critical duty value for fan out. If
not will use full speed for fan out.
RPM Mode
Enables or disables Smart Fan IV close loop fan control RPM Mode.
Fanout stepping
Enables or disables Smart Fan IV stepping.
USB Configuration
This section is used to configure USB parameters.
USB Configuration
USB Devices:
3 Keyboards, 1 Mouse
Legacy USB Support [Enabled]
XHCI Hand-off [Enabled]
USB Mass Storage Driver Support [Enabled]
USB hardware delays and time-outs:
USB transfer time-out [20 sec]
Device reset time-out [20 sec]
Device power-up delay [Auto]
Enables Legacy USB support.
AUTO option disables legacy
support if no USB devices are
connected. DISABLE option will
keep USB devices available
only for EFI applications.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Legacy USB Support
Enables Legacy USB.
Auto Disables support for Legacy when no USB devices are connected.
Disable Keeps USB devices available only for EFI applications
XHCI Hand-off
This is a workaround for OSes without XHCI hand-off support. The XHCI
ownership change should be claimed by XHCI driver.