DivioTec NRP14162 Series, Manual

Page: 27 / 68

Chapter 2: Jumpers and Connectors
24
2 4 6 8
1 3 5 7
10 12 14 16
9 11 13 15
PoE Switch Action Guidance
NRP14162 have a total of 16ch PoE ports 10/100 Mbps, 802.3af/at
compliance with a total of 240W max (PSE).
▪
802.3af support 16 ports @ 15W
▪
802.3at support 8 ports @ 30W
▪
**Note: The 16ch PoE ports of NRP14162 are divided into 2 groups
(A&B) of 8ch PoE switch and the deployment of Group A and Group B
are independent and cannot be mixed. For the following example, the
PoE switch deployment guidance will be based on group A and Group B.
PoE Switch Connecter Define (Rear IO)
PoE Switch LED Indicator Status (Front Side)
▪
When the cable is plugged into the PoE port and if the device is detected,
then the LED will indicate the corresponding port.
▪
When PoE overload >120W, the LED of the last plug in PoE port will blink.
PoE Switch Deployment
1. AF Mode
Group A: Port 1, 2, 3, 4, 5, 6, 7, 8
Group B: Port 9, 10, 11, 12, 13, 14, 15, 16