Quantity
Hardware
1
Fred-Eco Assembly
2
Hose Clamps
1
Flex Hose
• Mount Flex Hose to Swivel Base and capture Arm.
• Tighten Both Hose Clamps.
STEP 7.
Install Flex Hose.
3.7 Install Flex Hose
STEP 1.
Selecting a Location.
APPENDIX 4 - ARM-TO-WALL DIRECT INSTALLATION
4.1 Selecting a Location
• Read and understand
SECTION 1: Safety Precautions
.
• Mount sufficiently close to an appropriate power source as outlined in Section 3.5: Electrical Options
• Near the operator, and within the operating range of the unit.
• With an attachment point (column, platform, or wall) that will support the weight and force of the equipment.
• With sufficient minimum clearance to the right of the unit, as outlined below. Minimum clearances shown allow for easy filter servicing and maximum
performance.
• Distance from floor is by user preference, but care should be taken to not mount as an overhead hazard to the operator.
Wall
65”
Ceilling
Wall Mounting Bracket
6” Ducting
Floor
18
