3.5 Attach Filter to Blower Assembly
Quantity
Hardware
1
Motor Blower Assembly
4
3/8” Threaded Rod, 91 cm Length
8
3/8” Threaded Knob
1
Filter Compression Plate Assembly
1
Filter Cartridge
• Place Filter in final location.
• Install the Connecting Rods, ensuring the Filter is not damaged during installation.
• Tighten left Knobs to hold Connecting Rods.
• Install Right Filter Bracket.
• Tighten right Knobs to Lock Filter.
STEP 5.
Attach Filter to Blower Assembly
17
3.6 Attach Capture Arm to Swivel Base (J-Bracket)
Quantity
Hardware
1
Swivel Base with J-Bracket
1
Capture Arm Assembly
3
3/8’’ Bolt, Socket Cap
6
3/8’’ Washer
3
3/8’’ Lock Nut. Socket Cap
• Insert J-Bracket between Capture Arm Mounting Bracket.
• Thread Bolts (3) with Washers (3) through Mounting Bracket and J-Bracket.
• Thread Washers (3) and Locking Nuts (3) to Bolts (3)
• Tighten all Bolts (3) to Locking Nuts (3)
• Toque each bolt to 40 N m
STEP 6.
Attach Capture Arm to Swivel Base. (J-Bracket)
