4.4 Attach Filter to Blower Assembly
Quantity
Hardware
1
Motor Blower Assembly
4
3/8” Threaded Rod, 91 cm Length
8
3/8” Threaded Knob
1
Filter Compression Plate Assembly
1
Filter Cartridge
Quantity
Hardware
1
Fred-Eco Assembly
1
Remote Mount Bracket
1
Attachment Point Anchors (Not Included)
• Place Filter in final location.
• Install the Connecting Rods, ensuring the Filter is not damaged during installation.
• Tighten left Knobs to hold Connecting Rods.
• Install Right Filter Bracket.
• Tighten right Knobs to Lock Filter.
STEP 4.
Attach Filter to Blower Assembly
4.5 Mount the Remote Mount Bracket in Suitable Location Relative to FRED-ECO Assembly
STEP 5.
Mount Bracket in Suitable Location Relative to FRED-ECO.
20
