29
DIVERSITECH TOUCH SCREEN THERMOSTAT CONFIGURATION
ADVANCED SETTINGS – WELCOME
•
º
F:
Choose between display units of Fahrenheit or Celsius for thermostat temperature
•
SECURITY:
The security settings allow you to protect your DiversiTech ther-
mostat from unauthorized use, and pro vides 2 levels of security. On your
Home Page once this feature is activated you will see a small lock icon.
• Turn Security On or Off – the Factory Setting PIN is 1111
• As a first time user you will be prompted to enter the Factory Setting PIN 1111
• Enter your new PIN and then Re-enter your new PIN once more.
• There are two modes of password protection:
Full Lock
Function does not allow
any changes unless the user enters the PIN.
Partial Lock
Function allows you to
change only the temperature setpoint without entering a PIN.
•
INSTALLER MESSAGE:
(up to 42 characters) to
appear at programmable intervals . Enter your
message on the screen using the keyboard – for
example service reminders or emergency contact
information. Type your message in using the keyboard,
upon completion choose OK. Set the number of
months after which you with the message to appear.
Touch the home or menu icon to exit.
28
DIVERSITECH TOUCH SCREEN THERMOSTAT CONFIGURATION
ADVANCED SETTINGS – WELCOME
•
HOME BUTTON:
Returns you to the Home Page at anytime- remember you will
have to re-enter through the Advanced Settings button.
•
DAYLIGHT TIME :
Choose Daylight Time On or Off dependent on your Time Zone.
•
FILTER:
A Helpful reminder to change or clean your air filter. The Filter Monitor
function indicates how many days of "fan run time" the air filter has been used. Reset
it each time after changing your air filter.
•
ENERGY WATCH:
By entering the HVAC system con-
sumption parameters rounded off to kW, you will have
a real time total of kilowatts and cost of consumption.
To review touch the Energy Watch button on the Menu
Page. EXAMPLE:
Fan
1kW,
Heat Pump
1kW/ton,
Furnace
5-30 kW, 7-9¢/kW
• This feature will run consecutively for 255 days. If
you do not enter your information what will appear on
the display is the total time the Compressor and the
Furnace have been operating.
