w
w
w
.d
iv
e
rs
e
-t
e
c
h
n
o
lo
g
ie
s
.n
e
t
Page 4
The Magnetic Field Meter is
used to measure the intensity and the
direction of magnetic fields. The meter can
be used to show the actual value of the
intensity of the magnetic field as an
average, peak or RMS value. The
measured values can be presented in a
range of units and the chosen options can
be selected from a menu displayed on the
meter.
The is supplied with a Hall probe
which is sensitive to magnetic fields. Flat,
tangential probes measure the field through
the flat surface. On special order, we can
supply round, axial probes to measure the
field along the axis of the probe (see Fig 1).
Magnetic fields can be measured in a range
of units. The preferred unit can be selected
from the menu displayed on the meter.
A serial output for connection of the Magmeter to a computer
either through RS232 or USB is available as an option.
Software is included with this option which enables the magnetic
field measurements to be recorded and input to a spreadsheets.
The Magnetic Field Meter is supplied in a carrying
case together with a Hall probe. Versions which use the serial
output are supplied with a lead for connection to a computer.
Introduction
