w
w
w
.d
iv
e
rs
e
-t
e
c
h
n
o
lo
g
ie
s
.n
e
t
Page 12
Step 8 Logging mode
From the set up menu select Logger.
8.1 Review
This presents the logged data in groups
of 4 to the extent of the logger database. You can scroll
through the data with the up/down keys. Any other key exits.
Data is stored as a x10 integer i.e. 24.5 as 245.
8.2 Clear
This clears the complete logging database to zero.
8.3 Serial
This outputs the complete database to the serial interface.
8.4 Period
The time period between samples is set here between 1 and
120 seconds. The adjustment is done using the up and down
keys. Note pressing and holding these keys advances in
increments of 10.
8.5 Start
This starts logging with auto power down disabled during
logging. During logging the normal display screen is presented
showing the sample number # on the left hand side and the
time period at the top of the display. Logging can be stopped by
a short press of the
tick key. When logging is complete the
unit returns to normal operation.
8.6 About
Please contact us for support, calibration, updates and repair.
Operation - Logging
