w
w
w
.d
iv
e
rs
e
-t
e
c
h
n
o
lo
g
ie
s
.n
e
t
Page 5
The Magnetic Field Strength Meter is shown in
Figure 2. The Meter is calibrated within a few weeks of
despatch and a calibration certificate will supplied will be valid
for at least 12 months from the date of purchase. The unit
requires 4 AA cells which should be installed in the battery
compartment on the rear of the housing.
The Hall probe supplied with the
meter is of a robust design suitable
for the measurement of magnetic
fields in workshops and laboratories.
The probe will, however, be damaged,
if it is subject to mechanical stresses
or forces. The sensitive region of the
Hall probe is in the centre, two
millimetres from the tip. Fig. 1 shows
the location of the sensitive region
and the direction in which the magnetic field is measured.
If you have chosen the serial interface version, you should
install the software on your Windows PC. To do this download
the zip file from our web site. To install on Windows, navigate
to the download folder then:
Use Program Manager: run file
Double click on INSTALL.BAT.
The software will be copied to your hard disc C:\diverse.
First time
