Operating instructions
64426 A 03/35
page 10 - 14
5.2
Maintenance and Repair
Always pull the plug out of the socket before you perform any
maintenance or clean the grinder.
Always check the grinder regularly for damage, especially damage to the
power cord, plug, finger protector etc.
Any repairs necessary may only be performed by an authorised
specialist. Please contact an authorised service centre or your dealer.
5.3
Spare Parts
Spare parts are usually ordered from your customer service centre or your local dealer. To
ensure quick, correct processing of your order, the following information is absolutely
required:
1. Type designation and serial number of the grinder
(on the rating plate on the rear side of the grinder).
2. An exact description of the part to be replaced or the article number.
Periodic checking of the grinding quality and grinding discs must only be
performed by competent specialists and/or service personnel.
5.4.1
Setting the scale (adjustment)
Setting of the scale (with the adjusting knob) makes the fineness of the ground coffee
correspond with the fineness set on the scale (marked).
Setting of the scale must only be performed by persons familiar with the unit
after carefully reading the following instructions.
Checking the setting:
When turning the adjusting knob from scale position Turkish to French Press
there must on no account be a sound of metal parts rubbing together.
There must be
no sound
of grinding discs rubbing together at scale position
Turkish = excessive wear of grinding discs.
