Operating instructions
64426 A 03/35
page 7 - 14
3
Setting Up and Basic Adjustment
The
KS 1 / KS 3
coffee grinders are suitable for grinding various kinds of coffee. The
grinding fineness can be set from "Turkish fine" to "percolator" with an adjusting knob
provided with a scale. The
KS 1 / KS 3
coffee grinders are suitable for use in small food
stores, coffee shops. The simple method of operation enables customers to use the grinder
themselves in self-service stores.
A grinding test run is carried out on each grinder in the manufacturer's factory. This is why
you may find ground material residue in the grinding mechanism!
3.1 Setting-up area
Place the grinder on a level surface free from vibration.
Never operate the grinder in moist, or even worse, in wet surroundings.
3.2 Initial Set-up
Open the top lid. Clear all foreign objects and shipping materials from the hopper
compartment and the entrance to the grind chamber.
3.3 Installation
You have received your grinder in operating condition. Now you only need to connect it to a
power supply system. Proceed as follows:
Determine whether the mains voltage and frequency correspond to the information on
the rating plate.
Protect your grinder with a separate pre-fuse (not included in the scope
of supplies) according to the information provided under
Item 2
"Technical data".
Make sure that the pre-fuse is not overloaded by other
consuming machines (e.g. fan-forced heaters, deep freezers).
Insert the plug into the available grounded outlet.
3.4 Basic Setting
A grinding test can be conducted when the grinder is ready for
operation.
The basic setting has been set in the factory and the grinding degree is already
set to the finest grind.
For this reason please make no alterations, as this could lead to damage
of the appliance.
