ENG
DEU
18
DEU
Resetting factory settings
ENG
Display
Meaning
Solution
6x long flashing,
red
Device defec-
tive
• Observe the indica-
tion in the app.
• Have the device
checked by a spe-
cialist dealer.
• Replace the device.
Short lighting in
orange (after re-
ceipt message)
Batteries empty Change the batteries
8 Changing batteries
CAUTION
Risk of explosion due to improper replacement!
Incorrectly used batteries may explode and damage the unit or
injure the user.
¾
Replace batteries only with the same or equivalent type.
¾
Never charge batteries.
¾
Do not throw batteries into fire or expose them to excessive heat.
¾
Do not short-circuit batteries.
A low battery voltage is indicated by flashing codes on the device
(see „Displays“ page 17), or the symbol
in the DITECH Smart
Home iL app. Replace the batteries with new ones.
1. Turn the unit counterclockwise to release it from the mounting
plate (see fig 6 page 3).
2. Remove the batteries.
3. Insert two new LR06/Mignon/AA batteries according to the
markings.
4. Insert the device back into the mounting plate.
9
The device performs a self-test.
9
The unit is ready for operation.
9 Cleaning
Clean the device with a soft, clean, dry, and lint-free cloth. The cloth
may be moistened with lukewarm water for the removal of heav-
ier contamination. Use a solvent-free cleaning agent for cleaning.
10 Resetting factory settings
All settings will be lost when the factory settings are restored.
Ö
The device is located within the radio range of the Alpha IP
Access Point.
1. Ensure that the device is active.
2. Delete the device from the app.
9
The factory settings are reset.
Summary of Contents for DT5653
Page 3: ...DEU 3 DEU ENG 2 3 5 4 F G H 6 ...
Page 20: ...134446 1811 ...
