User manual in Original
Doc. ref: 500A_GTS-E65_am_en_210608
DISPERATOR AB
Tel: 08-724 0160
E-mail: [email protected]
Mälarvägen 9, 141 71 Segeltorp
Web page: www.disperator.se
47 / 48
46 / 48
28. The disposer is now ready to be reassembled under the hopper in the cabinet using the same
trolley with lifting plate (or the same steady jack with lifting plate) as previously used when the
disposer was dismantled. Be aware of the motor power supply cable so it does not get pinched
and damaged.
29. Make sure that the seal for the hood (P17) is placed correctly before you move the disposer into
position under the hopper for mounting with 6 pcs. of new unused locking nuts (P18).
30. Reconnect the drain hose from the pump inlet to the outlet pipe on the disposer end shield (P3).
31. Reconnect the disposer motor
(P1) connection cable to the AS1-electrical control box
according
to the electrical connection diagram supplied with the machine from Disperator.
32. Reconnect electrical supply using the main electrical safety breaker on the wall/bulkhead.
33. Start up and test the GTS-processor according to applicable start-up procedures described in
section 6.5 of this user manual.
Summary of Contents for 500A-GTS-E65 EXCELLENT SERIES
Page 2: ......
