User manual in Original
Doc. ref: 500A_DRR-K_am_en_210602
DISPERATOR AB
Tel: 08-724 0160
E-mail: [email protected]
Mälarvägen 9, 141 71 Segeltorp
Web page: www.disperator.se
18 / 44
6.1.3. Fixation of the Machine
If the disposer can turn in the assembly, or if it is placed freely, for example next to a peeling
machine, then the machine must be fixed with a torque protection bar against the wall /
bulkhead according to the figure below. When starting or stopping quickly when stuck (for
example if cutlery accidentally ends up in the disposer), the motor torque can otherwise turn the
disposer so that the drain pipe / water trap is turned out of position and there is a risk of leakage.
If the torque protection bar is not suitable due to too great a distance to the wall / bulkhead, the
feet can be welded directly to the floor. If the torque protection bar cannot be arranged at the
installation site, it is available as an option at Disperator, see section 9.2 (P32). Torque protection
for floor mounting is also available as an option from Disperator, which facilitates work during
service as the weld around the legs does not need to be cut loose.
Torque protection bar
Summary of Contents for 500A-DRR-K EXCELLENT Series
Page 2: ......
