55
Problem
Possible Causes
What to do
Power Indicator on
front panel not lit.
Main Lead unplugged/
switched off
Check that the adapt-
er is plugged in and
switched on.
No picture on TV
Your TV isn’t able to display the
current output format
Check to see if your TV is set
to the current source.
Go to Menu > Settings >
System Settings
Adjust the resolution to suit
the TV, sometimes HDMI ca-
bles can’t provide a 1080p
picture to your TV.
Tuning Failed or
Database Empty
•
Dish cable not plugged in
•
Satellite Dish may be
misaligned
Plug in the Satellite Dish
cable into the top right SAT
IN socket at the back of the
receiver.
Align the Dish to the correct
Freeview Satellite (OPTUS
D1) ensure that there are no
objects that could interrupt
the signal path.
Remote Control is
not responding /
working
No batteries or batteries incorrect-
ly inserted into the back of the
remote
Insert the supplied 2x AAA
Batteries into the back of
the remote.
Batteries are flat
Replace batteries with new
ones.
The Infrared receiver on the S8200
receiver is obstructed (Front panel
blocked by objects)
Check that there is a clear
line of sight between the
front panel and your remote
control, move objects if
necessary.
Picture is distorted
either too wide or
narrow and image
cuts off.
The TV ratio has been incorrectly
set
Go to Menu>Settings>Sys-
tem Settings and adjust the
Aspect Ratio settings.
Quick Troubleshooting
