36
Satellite Scan
Satellite Scan allows you to make
some changes to the current satellite
configuration such as adding, scanning,
editing satellites. Viewing Transponders
and adding or removing them as well
as adjusting the LNB set up.
Scanning the Satellite
If you need to re-tune your satBox, use
this option, this will restore the channels
you have lost using the carriers already
on pre-configred with the receiver.
1. Highlight the Satellite you wish to
scan.
2.
Press the GREEN button to confirm
the scan, select what services
you would like (FTA is Free To Air
Channels)
3. Please wait for the scan to process
and complete.
The scan above only works in some
circumstances, if channels have moved
carriers please use the Blind Scan option
found on Page X.
Transponder Edit
Add, remove or edit the carriers
available on the satellite.
Press the
Red Button
to open the TP List.
Press the
Blue Button
to add/edit the
carrier you have currently highlighted.
Press the
Green Button
to scan that
particular TP.
Installation
