37
Installation
LNB Setup
You can adjust a few settings on the
LNB to ensure you have configured your
satellite setup correctly.
• LNB Type
Specify the type of LNB you are
using to receive the selected
satellite, use the left and right keys
to toggle through the LNB Types
and Frequency.
• 22 kHz
Toggle this on if the selected
satellite is passing through the 22kHz
port on the switch.
• DiSEqC
If your system uses a multi-switch or
a motorised control then toggle the
correct setting.
• Tone Burst, Positioner
• Power
Leave this on if this unit is the
primary connected to the satellite
dish directly.
Add a Satellite
Press the Blue button to add a satellite
from scratch. Use the on screen options
to help you set the signal up.
You can delete your own satellite
entries however you are unable to
alter or affect any of the pre-loaded
satellites.
