Dish Network Home Network, Installation Instructions Manual, Page: 11 / 18

Page 10
Setting up the Receiver
Once the receiver has been connected to the home network, use these steps to set up and verify the
receiver’s Internet connection.
Using the DISH Network remote control for the receiver that is connected to the home network,
access the Network Setup screen by pressing
MENU , selecting
System Setup
,
Installation
,
Broadband Setup , then Network Setup . Verify the IP address is populated (not all 0s). If the IP
address is all 0s, select
Reset Connection
. An Attention 875 message will display briefly, then
you will return to the Network Setup screen.
Network Setup Screen Attention 875 Message
Verify the Connection Status on the Network Setup screen shows Connected Online , and that
the IP address does not show all 0s. If the IP address shows all 0s or the Connection Status shows
Not Connected, refer to
Troubleshooting on page 12.
Network Setup Screen with IP Address
Select Done to exit the Network Setup screen.