Dish Network 167821, User Manual

Page: 17 / 40

7
S
WITCHING
B
ETWEEN
TV
AND
A
MPLIFIER
V
OLUME
C
ONTROL
When you set up the remote to control a TV, the MUTE and VOLUME
buttons control the TV volume, even if your remote control is in
SAT
mode. However, if you want to use the AUX mode to control a tuner or
amplifier that has a volume setting, you can set up the remote to control
the tuner or amplifier’s volume instead of the TV volume while your
remote control is in
SAT
mode. Follow the instructions in the left
column to switch to controlling volume in AUX mode. To change back
to controlling the TV volume in
SAT
mode, follow the instructions in
the right column.
Control Amplifier Volume Control TV Volume
1
Press and hold the
AUX
mode button for three
seconds, and then let go of
it. The
AUX mode button
blinks.
1
Press and hold the
TV
mode button for three
seconds, and then let go of
it. The
TV mode button
blinks.
2 Press the POUND ( # )
button.
2 Press the POUND ( # )
button.
3 Press the plus (+) side of
the
VOLUME
button.
3 Press the plus (+) side of
the
VOLUME
button.
4 Press the 0 number button. 4 Press the 0 number button.
5
Press the
POUND
(
#
)
button.
5
Press the
POUND
(
#
)
button.
The
AUX
mode button
flashes three times.
The
TV
mode button
flashes three times.
M
AKE SURE THE REMOTE
CONTROLS THE AMPLIFIER
’
S
VOLUME
:
M
AKE SURE THE REMOTE
CONTROLS THE
TV’
S VOLUME
:
6 Press the SAT mode
button.
6 Press the SAT mode
button.
7 Press the plus (+) and
minus (-) sides of the
VOLUME button.
7 Press the plus (+) and
minus (-) sides of the
VOLUME button.
8
The equipment’s volume
changes and the AUX mode
button lights instead of the
TV mode button.
8
The TV’s volume changes
and the TV mode button
lights instead of the
AUX
mode button.