Dish Network 167821, User Manual

Page: 13 / 40

3
L
IMITED
M
ODE
You can program your remote control in Limited Mode to keep from
accidentally changing the channel on your TV or VCR. When Limited
Mode is enabled, you cannot select TV mode. If you press the
TV
button while TV mode is programmed in Limited Mode, the TV button
flashes and the
SAT
button lights, telling you cannot switch to TV
mode. The remote then moves back to SAT mode.
When you use the remote to control your TV in Limited Mode, you are
only be able to use the
POWER , MUTE , and VOLUME buttons to
control your TV. Also, when you use the remote to control your VCR
in Limited Mode, you are only be able to use the
POWER and VCR
function buttons. The section Programming Using the Equipment Code
Tables (page 4) has a step that tells the remote control to go into
Limited Mode. Also, a quick way to put the remote in Limited Mode is
on page S-3,
Placing Your Remote in Limited Mode .
Note
: Limited Mode cannot be used with audio amplifiers.
F
IXED
C
HANNEL
M
ODE
You can program your remote control in Fixed Channel Mode to
automatically set the TV and/or VCR to a given channel when you
press either
RECOVER
or the
SAT
button.
S
ETTING
(
OR
C
HANGING
) F
IXED
C
HANNEL
M
ODE FOR
TV
AND
/
OR
VCR
1 Press and hold the TV or VCR mode button until all four mode
lights illuminate.
2 Press the STAR key (*). Enter a channel, using two or three digits
between 02 and 125. For example, to set channel 25, enter *25.
3 Press the POUND (#) key. The TV or VCR mode button flashes
three times.
R
EMOVING
F
IXED
C
HANNEL
M
ODE FOR
TV
AND
/
OR
VCR
1 Press and hold the TV or VCR mode button until all four mode
lights illuminate.
2 Press the STAR (*) key followed by two zeros (*00).
3
Press the
POUND
(#) key. The
TV
or
VCR
mode button flashes
three times.