Page 65
Control Other Devices with the Remote
Page 65
Set Up the Remote Control
You can set up the remote to control other devices using the device codes
listed on page 86
.
In the following instructions, the column on the left
contains the instructions and the column on the right provides additional
information.
Instructions
Additional Information
1. Turn the device on.
Use the device’s front panel buttons
or its remote control.
2. Find the brand name of the
device in the tables starting
on page 86.
If the brand isn’t listed, see
Setting Up
Using Device Codes Scan
on page 86.
3. Press and hold the mode
button until all the other mode
buttons light up, and then let
go of the button. The mode
button flashes.
For example, hold
TV
for a TV until
all of the other mode buttons light.
When you let go,
TV
will flash.
4.
For AUX mode only
. Press 0
for a second TV, or 1 for a
second VCR, or 2 for a tuner,
or amplifier.
This step is for programming which
kind of device that should be
programmed in
AUX
mode. If you’re
not programming in
AUX
mode,
continue to step 5.
5. Enter one of the three-digit
device codes from the table
using the
NUMBER
PAD
buttons.
The three-digit device code should be
for the brand name of your device that
you found in step 2.
6. If you want to program
Limited Mode, press 1. If not,
skip to step 7.
See
Limited Mode
for more
information.
7. Press
POUND
(#).
If you entered the code correctly, the
mode button flashes three times.
8. Press
POWER
to turn off the
device. If the device does not
turn off, go to step 10.
If the code works, the device should
turn off.
9. Turn the device back on and
try some other buttons to
make sure they work. If the
code works for other buttons,
stop here.
Sometimes
POWER
works when
other buttons don’t.
10
If the code doesn’t work, redo
steps 3 through 9 with another
device code from the tables.
Try every code listed for your brand
until one works for your device.
Summary of Contents for 138410
Page 107: ...Appendix Page 118 Notes...
