5
Discus User Manual
4
Preparing Your Discus for Use
1.
Remove all packing materials from the Discus and retain should you need to return
the product under the guarantee.
2.
Conduct a visual inspection of the units to ensure no damage has occurred during
transit.
3.
Place the Discus on a clean level surface at the correct working height.
We recommend the Discus Stand and shelf. (see page 13 for assembly)
4.
Ensure wheel head bat locating pins are not protruding unless the Discus bat
retaining system is in use. (see page 7) Screw the bat pins clockwise just below the top
of the wheel and no further using the provided Allen key.
5.
Arrange the foot/hand controls so they are comfortable to use.
6.
Connect cables as diagram on next page.
DO NOT touch the plugs or electrical contacts with wet hands.
Before attaching the power lead to the mains outlet ensure the voltage is
UK Standard 230V 50Hz AC.
7.
Ensure all speed controls are set to zero before switching on mains and power unit.
8. When the Discus is supplied with a hand controller this should be fitted in place of
the foot controller.
9.
Ensure the Control unit is kept dry and positioned away from any contact with water
or other liquids.
10. The wheel head will continue to turn for a few seconds if the foot pedal is operated
directly after switching off—this is normal.
