Tel: 0845 1238367 Fax: 01942 665104 e-mail: [email protected] web: www.discreteheat.co.uk
I N S TA L L AT I O N
4. INSTALLATION SEQUENCE (continued)
Page 6
TM
‘CLICK!’
PUSH
20mm
40mm
‘CLICK,
CLICK,
CLICK!’
!
!
ENSURE BOTH SIDES ARE LEVEL
WITH EACH OTHER
In this case
only
, reverse the connector
and clip to retain the final section
CHECK THAT THE FINAL PIECE CANNOT COME OFF UNDER PRESSURE
If a return manifold follows an internal corner, double clips must be used.
FITTING FINAL SECTION
5. CORNERS AND COVERS
!
ENSURE BOTH SIDES
ARE LEVEL WITH
EACH OTHER
See separate instructions provided
with Regency OG & Deco PR
1
2
Mitre top gaskets before
fitting corner cover
TOP TIP:
Soak top gasket in warm
soapy water for easy fitting
Add a touch of super glue onto mitre
before fitting the corner cover
5mm
