VoIP
²
ALL 8 - 16 - 24 Channel Gateway User Guide
http://www.dtt.tw
52
2)
In the General tab. The following window appears:
3)
Define the following parameters:
Wait for Dialing
-‐ The time, in seconds, from the start of the dial tone that the VoIP²ALL waits
for the first digit to be dialed. After that time the VoIP²ALL closes the channel.
Last Digit Timeout
-‐ The time, in seconds, the VoIP²ALL waits to call the number after the last
digit dialed.
No Reply Timeout
-‐ The number of seconds without an answer that the Gateway waits
before determining no answer.
DISA
-‐ The number of seconds each DISA number stays in the memory.
Restart Call
-‐ When enabled, consecutive VoIP calls are allowed. Before the end of a call from
the cellular to VoIP, press * to receive a dial tone which enables you to call another VoIP
number.
4)
Click
Save
.
4.8.3.
TONE SETTINGS
This section describes how to define the tone settings to your country standards.
The
Tone Settings
tab in the
System
window displays a list of countries and the following tone
parameters:
Dial Tone
Disconnect Tone