26 / 54
To dispatch phone numbers automatically, in the "Send Comple te" list, select OMIT. Then set
three additional parameters:
1. Length of phone numbers that will be dialed from the port within range.
a. In the Min. Digits box, enter the number of digits of the shortest phone number that will
be dialed from this port.
b. In the Max. Digits box, enter the number of digits of the longest phone number that will
be dialed from this port.
2. Inter Digit Pause - This parameter defines a waiting time, after a digit is pressed,
before the number is automatically dispatched to the c ellular network.
If this parameter is set too low, then incomplete phone numbers may be dispatched if the
user pauses briefly while dialing.
If this parameter is set too high, then users would have to wait a long time before a
number is dispatched.
The inter digit pause is activated after the minimum number of digits have been dialed.
In many situations, two or three seconds may be appropriate for this parameter. Each
unit of this parameter is 50 milliseconds. For example, to set an inter digit pause of 3
seconds, enter a value of 60 in this box (60 * 50 milliseconds = 3,000 milliseconds = 3
seconds).
When a port is set to auto-dispatch phone numbers, after the user has dialed the
maximum number of digits, or, when an inter digit pause has occurred, then the num ber
is dispatched automatically.
3. Define minimum amount of time between outgoing c alls.
Enter the minimum amount of time between outgoing calls in the Intercall Timer box. Set
this parameter according to limitations of the c ellular network. In many situat ions, two
seconds may be an appropriate value for this parameter.
4. In the TX vol. and RX vol. the volume for each port can be adjust ed.
After making port settings, press Write Port Setting to send the settings to the Multi -Cell unit.
