15
8. INSTALLATION
WARNING
ELECTRIC SHOCK AND FIRE HAZARD:
This equipment must only be installed as specified.
Do not disassemble or modify the battery. If the battery case has been damaged, do
not touch exposed contents. No user-serviceable parts inside.
Failure to follow these instructions may result in injury.
NOTICE
For chargers or inverters with temperature compensated charging, disable this feature.
NOTICE
Do not use or install a battery temperature sensor.
NOTE
It is the responsibility of the installer to ensure that all applicable installation requirements
and standards are met.
8.1 Tools
• Insulated tools sized to match nuts, bolts, and cables in use
• RMS type Voltmeter
• Post cleaner and wire brush
• Personal protective equipment
8.2 Location
Install the battery in locations that meet the following requirements:
1. Do not install in direct sunlight.
Avoid installing the battery in an area
with high ambient temperature.
2. Moderate temperatures.
Ambient temperatures should be between 0°C
and 40°C (32°F and 104°F). Ambient temperatures of 15°C to 20°C (59°F
to 68°F) are ideal for extending LiFePO
4
battery life. Do not install in an
engine compartment, as this will expose the battery to temperatures
greater than 40°C (104°F).
3. Ventilated.
Do not install in zero-clearance compartments. Maintain at
least 20 mm (0.8 inches) above the top cover for open airflow.
4. Proper orientation.
The battery may be installed in any orientation other
than upside down. Do not install upside down.
5. Minimum cable lengths.
Select a location that minimizes the length
of battery cables to reduce voltage drop from impedance leading to
reduced performance.
