14
6.4.4 External ON/OFF Key
Use a momentary button type switch or a latching relay with a key to
switch ON/OFF a battery network from a remote location. To toggle the
battery network ON/OFF, connect the device to PIN 1 of the LYNK Network
communication line and the positive terminal of the batteries. Refer to
Figure 4.
Remote ON/OFF Operation with Battery Network.
Momentarily activate the button to switch the battery ON and then
momentarily activate the button again to switch the battery OFF.
A latching relay will engage the Remote Power Off (RPO) battery function (refer
to
Section 5.3
Battery ON/OFF Key
). Setting the key to the ON position for 5 seconds
will switch the battery ON engaging RPO Mode. Returning the key to the OFF
position will release the battery from RPO Mode and switch the battery OFF.
PIN 1
ON/OFF
PIN 1
ON/OFF
POS + Battery
Terminal
POS + Battery
Terminal
Momentary
Latching for RPO
Figure 4. Remote ON/OFF Operation with Battery Network.
7. OPTIONAL ACCESSORIES
Optional accessories are available for use with the DLP battery:
Accessory
Part Number
DLP B2B-400 (COMM Cable 0.4 meters / 15.75 inches)
950-0035
DLP TOL-7600 (COMM Cable 7.6 meters / 299.25 inches)
950-0037
DLP TOL -1800 (COMM Cable 1.8 meter / 70.87 inches)
950-0036
DLP T Connector (COMM T Connector)
with DLP B2B-400 (COMM Cable 0.4 meters / 15.75 inches)
950-0038
DLP T Connector (COMM T Connector)
950-0041
LYNK II Communication Gateway
950-0025
LYNK LITE Communication Gateway
950-0040
SOC GAUGE TYPE B
CAN Bus Battery Discharge Indicator with 1.8 meters / 70.87 inches cable
950-0039
SOC GAUGE TYPE A
CAN Bus Battery Discharge Indicator with 1.8 meters / 70.87 inches cable
950-0044
