USB charging port
Module USB port is for charging only. Please note this may not provide sufficient
current to charge newer power-hungry devices (e.g., iPhones). If you own one of
these newer devices, consider purchasing our
Smart charging Kit.
You may install the provided USB kit in 1 of 3 ways:
These are also applicable to optional USB Fast Charge Kit.
A
.
Flush to dash/panel requires drilling a ¾” hole
B
.
Flush Mount with Support bracket
(use this option to mount USB terminal
wherever your installation demands without drilling)
C
.
Not Mounted-
(default)-- Connect your own USB Cable
A.
Flush Mount to Dash or Panel
(requires drilling)
1.
Drill a ¾” hole in the dash or panel using a
hole saw, step drill bit or
equivalent (See
Fig. 19
)
Fig. 19
Step drill bit
2.
Insert
3.2ft
. (1 Meter) USB male terminal (See
Fig. 20
) through
¾”
hole created in step 1 and connect to module USB port (See
Fig. 21
)
Fig. 20
USB cable
Fig. 21
Module USB port
3.
Snap USB head to mounting surface until flush (See
Fig. 23
)
Fig. 22
USB head
Fig. 23
Flush mounted to dash
4.
Tuck and secure any extra wire from moving parts
B.
Flush mount with Support Bracket
(No drilling)
1.
Locate a flat surface at location of choice within
3.2 ft.
(1 meter) of
module and mount USB support bracket (See
Fig. 24
) to surface using
adhesive/tape or screws.
