3.
Connect supplied (3ft.) audio cable (See
Fig. 14
) to module
“AUX” input
jack, (See
Fig. 15
). Route other end to dash area or location where
audio device will reside (within 3ft).
Fig. 14
3ft. audio cable
Fig. 15
Bluetooth module
4.
Connect push-button/mic (See
Fig. 16
) to module
“M
IC
”
input (See
Fig.
15
)
Fig. 16
Control button/Microphone
5.
Consider where to install push-button/microphone. Keep in mind the
push-button must be within drivers reach and facing forward for voice
commands and phone dialog (cable is 6ft. long).
We recommend
completing the rest of the install prior to securing the
control/mic button to the dash.
Once you decide on a location simply
remove tape backing (See
Fig. 17
) and stick to dash (See
Fig. 18
)
Fig. 17
Control/Mic button
Fig. 18
Make sure no ventilation duct is pointed towards the mic.
It is best to mount button facing driver
