PRODUCT SAFETY & DISCLAIMER
READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE
PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY
•
This installation guide is provided as a GENERAL installation guide, some vehicles vary and
may require additional steps. We do not accept responsibility for third party labor charges
or modifications. Exercise due-diligence when installing this product.
•
We do not accept any responsibility for vehicle damage or personal injury resulting from
the installation of this product.
•
Careless installation and operation can result in equipment damage
.
Requirements:
Functional 6 cd auto changer
Introduction
Safety
comes first when you’re on the road, so having an intuitive and easy to
use Bluetooth kit is essential to reducing driver distraction. The JAG-HF kit is
compatible with virtually all Bluetooth phones, and sounds great for mobile
conversations or streaming music. In addition to Bluetooth, the
JAG-HF
provides a 3.5mm AUX input which can be used to connect wired devices
such as MP3 Players, iPods, Zune, iPads etc. (AUX input takes the place of
CD changer playback).
The built-in USB charging port can be used to charge
devices (1.8A), however for larger current hungry devices (e.g., iPhone 8 and
newer), we recommend adding optional
“Fast
c
harge” kit
. The audio
adapter connects to CD changer plug in trunk or hatch and Bluetooth module
installs beneath center console glove box (armrest).
Warning:
The required CD changer remains connected but will no longer
play.
To retain CD changer playback, purchase our
instead.
See
Frequently Asked questions
at the end of this guide
Installing audio module
Audio module connects to the CD auto changer connector in trunk/hatch
1.
Remove carpet trim piece surrounding audio rack
2.
Remove (4) 8mm nuts securing rack to vehicle.
3.
Locate cable holder behind audio rack for CD changer single thick black cable
(
connects CD changer to amplifier in premium systems and to radio in
standard systems)
(See
Fig. 1
)
Noteworthy:
There are similar size/color cables in this area. CD changer
single thick black cable is the correct one.
Fig. 1
4.
Remove black cable from holding tab and disconnect by grasping both plugs
and gently pulling apart
(do not twist)
5.
note
Fig. 2
- CD changer female connector (right), amplifier/radio plug (left).
