Fig. 7
12.
Connect included 3.5mm male to male audio cable (See
Fig. 9
) to module
“AUX” input jack
(See
Fig. 8
) and route to location where audio device will
reside (within 3ft).
Fig. 8
Module
Fig. 9
3.5mm male to male cable
12V Accessory
Warning:
Radio in Bose systems may not be able to provide enough
current to power both amplifier and module in which case module will
connect/disconnect at random in which case red accessory wire
Fig. 6a
must be used to connect module to an alternate location. If
experimenting this issue, please follow alternate instructions below
13.
From
Fig. 6
: Disconnect terminal
from
(default wiring). Connect
terminal
to terminal
(Terminal
not used). Route and connect
other end of accessory wire to
ignition harness under steering column
inside driver's lower-dash kick panel. Panel is supported by three screws at
the bottom and three metal/plastic clips at the top. Tap accessory wire to
ignition harness brown wire
.
14.
Plugin control/microphone (See
Fig. 10
) to
“MIC” input
on Module (See
Fig. 8
)
Fig. 10
push-button built-in microphone
