Optional dash mount button style microphone
For convenience, we offer an optional button microphone (See
Fig. 9
) instead of
standard visor microphone
. (Fig. 8)
The standard microphone installs on visor or headliner, but optional button style
microphone can be mounted to dashboard or custom installed as seen in image
below.
To install simply connect plug to module “
MIC
” input jack (See
Fig. 6
), route
button to dash area (cable is 6ft. long); clean surface, remove tape backing and
secure to dash.
Notes:
- When button style microphone is added to order, standard visor
microphone (See Fig. 8) is omitted.
- Push-button has no functions, only built-in microphone.
Fig. 9
Optional charging kit
(not for thumb drives etc.)
Add this charging kit to your A2DIY-CHRY02 module and keep those power
hungry devices charged while on the road.
Should you decide to add it, we suggest one of 3 connecting options:
A
.
Flush to dash/panel requires drilling a ¾” hole
B
.
Flush with Support bracket
(Mount USB terminal wherever your installation
demands without drilling)
C
.
USB port-
(default)
A.
Flush to Dash or Panel
(drilling required)
1.
Drill a ¾” hole in the dash or panel using a step drill bit or equivalent
(See
Fig. 10
)
Fig. 10
Step drill bit
2.
Insert supplied 3ft. USB male terminal (See
Fig. 11
) through hole
created in step 1 and connect to module USB port (See
Fig. 12
)
Fig. 11
Flush mount 3 ft. USB cable
