Fig. 4
Module
3.
Connect included 3.5mm male-male cable (See
Fig. 5
) to module “AUX”
input jack (See
Fig. 6
), and route cable other end to where audio
device will reside (within 3 ft.,)
Fig. 5
Fig. 6
4.
Install microphone to visor or headliner using included visor clip (See
Fig. 8a)
.
Fig. 8
Microphone
Fig. 8a
Visor clip
5.
Use clip to install microphone (See
Fig. 8
) to visor or location of
choice and route cable down pillar, under dashboard toward module
location and connect to module “MIC” input (See
Fig. 6
)
Excursive caution when routing microphone so to not damage the
cable and ensure no ventilation duct is pointed towards
microphone
.
