PRODUCT SAFETY & DISCLAIMER
READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE
PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY
This installation guide is provided as a GENERAL installation guide, some vehicles vary and
may require additional steps. We do not accept responsibility for third party labor charges
or modifications. Exercise due-diligence when installing this product.
We do not accept any responsibility for vehicle damage or personal injury resulting from
the installation of this product.
Careless installation and operation can result in equipment damage
.
Requirements:
CD CHANGER CONTROLLING RADIO
Introduction
The A2DIY-CHRY02 wirelessly connects mobile devices to Chrysler radio system
allowing for Smartphone hands-free calls, music streaming, turn-by-turn
navigation, and more. A wireless connection means no wires, clutter or
complicated setup. The A2DIY-CHRY02 plug-n-play solution connects to the 10-
pin CD changer/Sat radio port which guarantees to best possible sound. In
addition to Bluetooth, users can also connect and play other devices through the
module AUX input jack and use included wireless remote to switch between
sources, adjust volume, change tracks and more.
See Frequently Asked question
at the end of this guide for details.
Installation
Radio must be removed from dashboard to gain access to the connectors.
Vehicle specific radio removal is not part of this guide; however, they are
available upon request.
With radio out;
1.
Connect installation harness 10-pin plug (See
Fig. 1
) to radio 10-pin
connector, (See
Fig. 2
)
Any factory option (satellite radio, CD changer etc.) already in place,
must be permanently disconnected.
Fig. 1
10-pin plug
Fig. 2
Radio 10-pin connector
2.
Connect installation harness 8-pin plug (See
Fig. 3
) to module 8-pin
connector (See
Fig. 4
)
Fig. 3
Installation harness
