_________________________________________________________
143715-F
NSM /DISCx000 Version 2.0 QickInstallatinsGuide
Rev. C
20
SETTING DRIVE SCSI IDS
The ID switches on the rear of the Optical Library are used to set drive SCSI
Ids (only NSM/DISC 3-7000).
Use a small screw driver to change the ID setting.
The ID range for each drive is 00 to 07.
For additional information about the drive assignment of the Optical Library see
the configuration protocol which is attached to the Quick Installation guide.
Type Plate
Robotic Mode and ID Switch
RS232 Connections
Power Connector
Drive SCSI ID Sw.
SCSI Connections
SE SCSI=50pin Centronics
LVD SCSI=68pin HD
Most Optical Library managing applications require the ascending order of
SCSI drive IDs to be set from bottom to top! (D1 = lowest ID, Dn = highest
ID)
Power
Connector
RS232 ID and
Mode Select
Switches
(Rotate to select)
RS 232 Interfaces
Serial number plate
SCSI Connectors
