Elite Setup Guide- Thermal Printer
7
Now test the printer.
With the printer aligned to load the CD-
DVD correctly, open the PowerPro label
software. Make a test image in the
software and print several discs manually
by loading the printer by hand.
STOP : If the printer does not print your
label manually, STOP and take steps to
print your label. DO NOT PROCEED IF
YOU CANNOT PRINT MANUALLY.
Once the test image is established and
approved we can move to using the
autoloader and processing discs
automatically.
STOP : Save your file!
To use the printer file with the Discjuggler
software, you will need to
Print to File(.prn)
Be sure to watch where you save the print
file, so that it can be used correctly.
With Windows XP you will need to name the print
file and include the .prn as an extension. Place the
entire name in the box, for example
thermal.prn
Now you are ready to move to DiscJuggler and automatically print discs.
Proceed to Page 10 in the Elite Hardware
Installation and Setup Guide